New Fused Glass Pattern Bar Bowls & Plates

I've been busy stocking up and trying to make larger pieces in preparation for the Association of Clay and Glass Artists (ACGA) show earlier this month (this was the show that I posted about earlier with the live jury).  Here's a few pieces that I made within the past month.

The first is a commission piece for a friend of mine:

I liked the look of the blue and green combination, so I decided to expand on it using both the progressive and bookend pattern bar techniques:

I also made another bowl using the black/grey/red combination.  I tried in the past to make a fused glass plate using black/white/red but found that a little challenging since the black and white combination make pattern bar work much more difficult (black fires softer, while white fires harder).

Keeping the black/red combination going, I made a fabulous 12" plate using the bookend pattern bars across and down.  It's difficult to see but there's a dark red strip about 2/3's of the way down.

This was also difficult to photograph.  If I put it against the light, the colors are a little too bright.  The following two photos give a sense of that (bright colors) but turned out much better than the photo above did when backlit.

The ACGA show turned out to be a great show, so all the trouble of the live jury was worth it.  The quality of the work was very impressive, especially considering that there were about 160 clay and glass artists only.  It was inspiring to see the breadth and variety of clay and glass work.

Now that it's over, I have three more pattern bar blocks that I'll be cutting up this week, so I'll be posting some new work in the upcoming months.  The color palate will be new for me - a little more muted or fall type colors - blues & grays and ambers & greens.

Let me know what you think and if there are any color combination or designs that particularly strike you.

Fused Glass Pattern Bar Bowl: Lessons Learned

In my last post, I wrote about how I was able to save some of the glass that failed and showed a picture of the blank before it was slumped.  Well here's the final product:

I am thrilled with the result and it's been sitting on my kitchen table since I finished it.  This is also my first bowl as I was space constrained in my old kiln and in general I hate the idea of creating excess glass from cutting out circles (all circles are made from squares).  Although now, I'm planning to make more and have my sights on another larger bowl mold.

In the process of making this, I learned a couple of things that I thought I would pass along:

• As the rim shows, you can no longer have a layer of clear and a layer of color, which is the normal fusing process.  The deeper the slump, the more the rim will show.  In the future, I might reverse the color (e.g. white on one side, black on the other) or have two layers of the same color.
• I incorporated the pattern bars right into the fused blank and ended up using my tile saw to cut off the excess and grinder to neaten up the edges.  This process worked pretty well and saved me from a lot of grinding!  To determine where to cut, I used a protractor and drew a circle with a white DecoColor pen (this is what many manufacturers use to mark glass as it doesn't come off easily).
• I needed to use a level to make sure the mold and glass was sitting evenly before I slumped it.  The mold I used is a ball shaped mold but when you put it on posts, it can shift depending upon where you have the posts.  Fortunately, it didn't look right in the kiln so I was able to adjust it before I slumped it.

As I live in the Bay Area, we just got a Bullseye Resource Center here.  One of the benefits of the Resource Center is that Bullseye has all of their molds on display with a sample of what the slumped glass looks like.  This is so helpful as the slumped glass looks differently in person than it does on their website (this is because you have the scale and depth that you don't have in photographs).  Based on looking at the bowls, I've returned two unused bowl molds and am purchasing another one that I most likely would not have purchased based on what I saw online.

Looking forward to making more of these!